4X White Diamond Tripoli Compound Medium Cutting Remove Scratches 1Pound Bar

Description

WHITE DIAMOND TRIPOLI 4X
CUTTING COMPOUND
1 Pound BAR - ORIGINAL FORMULA
METAL BUFFING MEDIUM CUTTING COMPOUND MATERIAL
The 4X White Diamond Tripoli
is formulated with light abrasion with a medium cutting ability and is a color enhancing compound.
The
XXXX
White Diamond composition is made for removing fine lines and light marks on surfaces, recommended to remove and eliminate scratches and imperfections.
The 4X White Diamond works well on all soft metals, precious metal such as Gold Silver Copper and Brass as well as plastics.
NOTE:
We have included polishing recommendations at the bottom of this page, to assist you.
White Diamond 4X
COMPOUND
JETS Product #1614-402
Made in USA
Bars Size:
6" x 2" x 1-3/4"
+/-
Bar Weight:
1 Pound  (+)
·
Utilizes Quality Grade Abrasives
·
Combined with Additives
·
Long Lasting Composition
·
Good Adhesion to Buffing Wheels
·
Minimal Residue
·
No Discoloration- Enhances Color
·
Produces - Medium Cutting
SALE
IS FOR 1 BAR
SHIPPING: Via USPS MAIL FIRST CLASS MAIL
NOTE: Visit
JETS  INC
ebay Store Listings, where you can see the compounds for various Metals and Applications, Polishing Compounds, Felt and Muslin Buffs and Buffing Wheels and a selection of
J
ewelers
E
quipment
T
ools
&
S
upplies
.
JETS Inc.
E13 CKSP M P
POLISHING RECOMMENDATIONS:
Our recommendations and suggestions on Buffing to obtain the best results possible:
·
Use the right compound for the metal that you are trying to polish
·
It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
·
Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
·
Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
·
Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.
If you have to then make sure buffs are cleaned (dressed) with a buff rake.
·
A clean buffing wheel edge is important.
·
Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.
·
Whenever you are working with Platinum never use a buff that was used for another type of metal.
WORK SAFE!
Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed
.
PROTECTION -
Protect yourself, your fingers and hands, your face and eyes and use respirators
.