Lot 100 Round Aluminum Spacers 11MM Long 6.3MM OD x 3.75MM ID Standoffs Bushings

Description

3715cSA2B.15
New American Fastener / Components, Inc. (Afcom), Round Aluminum Spacers, or Standoffs, or Bushings; Approximately 11MM Long x 6.3MM OD x 3.75MM ID, Part Number 3031RA437-22.  Each bid quantity is for a Lot of One Hundred (100) Spacers.  You may bid / buy any number of lots, up to the total quantity available above.
These were purchased in *extreme* bulk at a freight liquidation earlier this year, and they were brand new in large metal bins.  We packaged them in heavy Ziplok bags for resale.  Excellent quality spacers, lightly chamfered so there are no burrs or rough ends, and not bad as far as dimensional variation across the lot.The inside diameter of most of these runs a bit tight for a #8 or M4 machine screw, unless you hammered or pressed them on.  However, they will freely accept anything smaller, such as #6 or 3.5MM.  We didn't measure each piece obviously, but we did measure quite a few individual pieces and came up with the dimension range below.
According to the calipers
:
Length (approx.):   .436" - .439" / 11.08 MM - 11.14 MM
Outside diameter (approx.):  .247" - .250" / 6.27 MM - 6.35 MM
Inside diameter (approx.):  .148" - .153" / 3.75 MM - 3.88 MM
Threads:  Unthreaded
Maximum machine screw size:  #6 English or M3.5 (3.5 MM)