New Sunrise Ironworker - 66 Tons - Dual-Cylinder - Dual-Operator

Description

SUNRISE
Model IW Dual Cylinder Ironworkers range in capacities from 66 Tons to 185 Tons and feature
two High-Speed cylinders with two-position foot pedals
. The dual-cylinder series ironworkers are built with the SUNRISE tradition of well engineered products for high power, quality and reliability at an incredible price.
SUNRISE ironworkers have two foot pedals so
separate punching and shearing operations
can be safely performed simultaneously without interference.
The low pressure setting for tool change and spotting provides maximum operator safety. The quick, fully adjustable cylinder stroke and optional deep throat enable mounting a wide range of special equipment such as press brakes, vee-notchers, custom tooling and more.
The large punching base with the “T-slots” provides a solid base for securing the punch tooling, as well as a
wide range of optional and custom designed tooling.
SUNRISE
ironworkers offer the
lowest cost of ownership among leading ironworker brands
due to the integrated spin-on return line filter, bronze bushings and gibings, multi-sided blades and the
highest quality components as well a standard two year parts warranty.
STANDARD EXECUTION
Five fully integrated working stations
Two cylinder operation with separate remote foot pedals, one for the punch and one for the shearing stations
Simultaneous operation of both punch and shearing stations (controlled independently)
Punch cylinder with 4" stroke length and adjustable limit switches
Cylinder is machined flat to insure proper alignment
Cylinder has high-density bronze bushings
Cylinder is keyed
Heavy-Duty adjustable punch stripper with visibility window
Quick-change punch holder including all necessary punch sleeves to accommodate up to 2" round punch
Machined punch gauging table with adjustable X-Y back stops, scales and roller bearings for easy positioning
Dual-opening die holder with overhang for punching channel flanges
All necessary die holders to accomodate up to 2" round hole
Slug Bucket
T-slot bolster for rapid adjustment of die holder and easy accessory mounting
Angle shear with no material loss cut and four-edge blades
45 degree miter cut of angles
Section shear for 90 degree shearing of round and square bar up to machines capacity (channel blades available)
Plate shear with special rake angle to keep shearing deformation to a minimum. Four edge lower blade and
two ed
ge upper blade
Support table for plate shear with adjustable guides and scribe marks
Adjustable plate shear hold down with opening for miter cutting of angles (Hydraulic hold down available)
40" electric touch-n-go back gauge adjustable to accommodate plate, angle shear and section shear
Back gauge features a proximity sensor
Notching station with rectangular blades for shearing flat bar or angles
(Triangular notcher available)
Machined notcher gauging table with adjustable X-Y stops and scales
Notcher station guard with electrical safety interlock and flashing warning light
Short-stroke switch for notcher eliminates need to adjust limit switches to shorten stroke
Magnetic LED work light
Jog or full-stroke functions
11 sets punches and dies
, SUNRISE Type:
3/8",1/2",9/16",11/16",13/16",15/16",1",1-1/16",1-1/4",1-3/8",1-1/2"
Hydraulic and electrical systems with high quality components
Hydraulic system protected with suction strainer as well as spin-on return line filter
Electrics for 3/60/220 or 480 volt operation.  Low voltage at the controls.
Emergency stop palm buttons on both ends of machine
HD Start Up and Training Video, Tool kit, Manual, Electrical and Hydraulic Schematics
Detailed pictures, videos and PDF catalogs:
www.TrilogyMachinery.com
PUNCH
66 tons
PUNCH CAPACITY
1-1/2" in 3/8" material  or 2" in 5/16" material
Throat depth
12"
Stroke length
4"
Cycles
30/min
Working Height
40" to top of die
ANGLE SHEAR
Maximum capacity 90 degree
5" x 5" x 1/2"
Maximum capacity 45 degree
2-1/2" x 2-1/2" x 5/16"
Working Height
44"
SECTION SHEAR
Round bar capacity
1-1/2" (blade includes 1/2",1",1-/2" openings)
Square bar capacity
1-1/2" (blade includes 3/4" and 1-1/2" openings)
Channel capacity
5" (channel blades optional)
Working Height
48"
PLATE SHEAR
14" x 9/16"
Maximum W x T
10" x 3/4"
Angle mitering capacity
4"
Working Height
36"
NOTCHER
2" width x 3-1/2" depth in  3/8" material
V-notcher
3-1/2" x 3-1/2" in 3/8" material (V-notcher optional)
Working Height
36"
Motor
7-1/2 HP
Electrics
3/60/220 or 480
Weight
3975 lbs
Dimensions
67" L x 32" W x 68" H